SR-SES60-WB 12/24V 10A SES Intelligent Wireless Dimming LED Solar Charge Controller

Group SR-SES Series
Min. Order 1 piece
Terms of Payment L/C, T/T, Paypal, credit card
Update Time 2019-11-29
Item specifics
Charging current10A
System voltage12/24V
Output current0.15A〜1.98A
PV input voltage<55V
Operating temperature-35℃ to +65℃
IP protection degreeIP68
Light- control voltage5V ~ 11V
Light-control delayed time0min ~ 50min
No-load loss12V:14mA; 24V:25mA
Load output voltage<60v
  • Description
  • Product review

External temperature sensor 40W/12V 60W/24V waterproof solar charge controller

Product Description

Microwave sensor controller with remote controller SES60

Features of  SR-SES60

1.Exclusive controller for Lithium Battery, which suit for ternary Lithium, Lithium iron battery, Lithium cobalt oxides battery, etc.
2.Normal working+Sensitive+Morninglight mode design and working time can be set range from 0h to 15hours,power range from 0~100%.
3.Human infrared induction or microwave induction function.
4.Sensitive time delay can be set range from 0s~150s
5.Unique Lithium battery which is automatically actuated.
6.Flexible charging mode, equalizing charge or PWM charge auto switch.
7.Lithium battery low temperature charging protection, when the ambient temperature is lower than 0℃, the controller will auto stop low temperature charging so as to protect the battery.
8.Intelligent power mode, the load power can be adjusted automatically according to the battery power, can extend the maximum working time of the battery.
9.Digital high precision constant-current control, the maximum efficiency can reach 96%.
10.ecord the system status, can record at a max 7days and monitor the whole system.
11.Metal case, IP68 waterproof degree, can be used in all kinds of bad conditions.
12.Overheat protection function, when the controller reaches a certain temperature, it will decrease or close the load.
13.Varies system protection. Including the battery reverse connection, LED short circuit, open circuit protection and so on

Parameter of SR-SES60

NameValue
ModelSR-SES60-WBSR-SES60-IR
System voltage12V/24V
Output power40W/12V;60W/24V
Output current0.15A~1.98A
No load loss12V:14mA;   24V:25mA12V:11mA;   24V:21mA
Charging current10A
PV input voltage< 55V
LED driver efficiency90% ~ 96%
Over-voltage protectionOver-charging voltage +2V;×2/24V
Charging limited voltageOver-charging voltage +1V;×2/24V
Over-charging voltage9.0V ~ 17.0V;×2/24V
Over-charging recovery voltage9.0V ~ 17.0V;×2/24V
 Over discharge voltage8.0V ~ 17.0V;×2/24V
 Discharging recovery voltage9.0V ~ 17.0V;×2/24V
Current precision±3%(Load current>300mA
Load output voltage<60V
Over-temperature protection(environment)80℃ (Load power decreased)
Over-temperature protection(Inner)120℃(Load closed)
Light- control voltage5V ~ 11V
Light-control delayed time0min ~ 50min
Induction delayed time0S~ 150S
Working temperature-35℃ ~ +65℃;
Induction rangeVertical: 8M,horizontal: 10MVertical: 6M,horizontal:7M
Waterproof degreeIP68
Weight210g
Dimension(mm)58*82*20
The probe lead length(mm)320

Detail of SR-SES60

Microwave sensor controller with remote controller SES60Microwave sensor controller with remote controller SES60

Application of SR-SES60

Microwave sensor controller with remote controller SES60


    Loading...