IP2000-42 48VDC to 220/230VAC Pure Sine Wave Inverter

Group Off-Grid
Min. Order 1 piece
Terms of Payment L/C, T/T, Paypal, credit card
Update Time 2019-12-28
Item specifics
System nominal voltage48vdc
Input Voltage Range43.2~60Vdc
Input surge voltage≤80VDC
Output Voltage220VAC(±5%) 230VAC(-7%~+5%)
Load power factor0.2-1 (VA lower than Output Continuous Power)
Storage temperature range-35℃~+70℃
Frequency50/60Hz ± 0.1%
Distortion THD≤ 5% (resistive load)
Humidity< 93% (N.C.)
  • Description
  • Product review


Complete isolation-type inverter technology
•Adoption of advanced SPWM technology
•pure sine wave output
•Dynamic current loop control technology
•to ensure inverter reliable operation
•Wide DC input voltage range
•Low output harmonic distortion (THD≤5%)
•Optional output voltage and frequency at
•High conversion efficiency up to 95%
•USB output 5VDC/1A*
•RS485 communication port*
•Extensive Electronic protection
﹡Only the model of the USB output port or RS485 port.



Installation and Wiring:





Product parameters:



IP series

Project case:


Solar Home System

Solar home system are typically used for home photovoltaic power generation system, to solve electricity demand of none power or unstable power region. Also the power level rage is between hundred watts to kilowatts.



Solar Street lights System
Solar Street lights System are typically used for street lightning of cities, villages, the intelligent streetlight system will remote monitoring all street lamps to reduce the operation and maintenance costs of system.

Hybrid Energy System
The Hybrid energy system contains solar, wind, diesel and city electricity energy system. The system will meet the load demand of electricity in villages, islands, and telecom stations to reduce the system cost and improve the replenishment ratio of system.